產品中心
PRODUCT CENTER
- 聯系人 : 曹鏡森先生
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 移動電話 : 15989458768
- 地址 : ** 廣東省東莞市大朗鎮仙村仙一區99號
- Email : caojingshen@126.com
- 郵編 : 523792
- 公司網址 : http://m.lucascpr.com
- MSN : caoshingcer@126.com
- QQ : 454992321
- 聯系人 : 曹鏡森
- 聯系電話 : 0769-82226193
- 傳真 : 0769-82226193
- 公司網址 : http://m.lucascpr.com/
PLA Mixing Drying Dehumidifier
PLA Mixing Drying Dehumidifier，low-speed stirring crystallization drying， fluidized bed
**PLA Mixing Drying Dehumidifier: Technology Overview and Applications**
A **PLA Mixing Drying Dehumidifier** is an integrated system designed specifically for processing polylactic acid (PLA), a biodegradable thermoplastic derived from renewable resources. This equipment combines **mixing**, **drying**, and **dehumidification** functions to ensure uniform moisture removal, prevent hydrolysis, and enhance the material’s processability for applications such as 3D printing, packaging, and fiber production. Below is a detailed technical breakdown:
---
### **1. Working Principle**
The system operates through three synchronized stages:
1. **Mixing**:
- PLA pellets or powders are homogenized in a rotating drum or conical mixer, ensuring even heat and airflow distribution.
2. **Drying**:
- Heated air (40–80°C) circulates through the material, evaporating surface moisture.
3. **Dehumidification**:
- A desiccant wheel or compressed-air dryer reduces the dew point of the circulating gas (down to **-40°C**), enabling deep moisture removal from hygroscopic PLA.
---
### **2. Key Components**
| **Component** | **Function** |
|-------------------------|-----------------------------------------------------------------------------|
| **Mixing Chamber** | Blends PLA particles to prevent agglomeration and ensure uniform drying. |
| **Desiccant Dehumidifier** | Removes moisture from the airflow (adsorption or absorption process). |
| **Heating System** | Electric or steam-heated coils maintain precise temperature control. |
| **Air Circulation Fan** | Drives airflow through the system for efficient heat/mass transfer. |
| **Control Panel** | Monitors and adjusts parameters (temperature, humidity, mixing speed). |
---
### **3. Technical Specifications**
- **Moisture Reduction**: From 2,500 ppm to <150 ppm (critical for PLA extrusion/injection molding).
- **Temperature Range**: 50–80°C (avoids PLA’s glass transition temperature, ~55–60°C).
- **Processing Capacity**: 100 kg/h to 5 tons/h (modular designs for scalability).
- **Dew Point**: -40°C to -60°C (ensures ultra-dry conditions).
- **Energy Consumption**: 0.3–0.5 kWh/kg (optimized via heat recovery systems).
---
### **4. Advantages for PLA Processing**
1. **Prevents Hydrolysis**
- PLA is highly moisture-sensitive; residual water causes chain scission during melting, reducing molecular weight and mechanical strength. The dehumidifier ensures moisture levels <150 ppm, critical for maintaining material integrity.
2. **Uniform Mixing & Drying**
- Simultaneous mixing avoids localized overheating or moisture pockets, critical for consistent pellet quality.
3. **Energy Efficiency**
- Closed-loop air circulation with heat recovery reduces energy waste by up to 40% vs. traditional hot-air dryers.
4. **Compact Design**
- Integrated mixing, drying, and dehumidification in a single unit saves floor space and reduces material transfer losses.
### **5. Design Considerations**
- **Material Compatibility**:
- Stainless steel (316L) construction resists acidic byproducts from PLA degradation.
- **Explosion Protection**:
- ATEX-certified components for handling PLA dust, which is combustible at concentrations >20 g/m3.
- **Automation**:
- PLC-controlled recipes for different PLA grades (e.g., 4043D vs. 2003D).
---
### **6. Applications**
- **PLA Pellet Production**: Drying after polymerization or compounding.
- **3D Printing Filament**: Moisture control prevents nozzle clogging and layer delamination.
- **Biodegradable Packaging**: Ensures clarity and strength in blown film extrusion.
### **7. Case Study: Drying PLA for Injection Molding**
- **Input**: PLA pellets with 2,500 ppm moisture (amorphous, Tg ~55°C).
- **Process**:
1. Mixing at 20 rpm for 10 minutes to homogenize.
2. Drying at 70°C with -40°C dew point air for 3 hours.
3. Output moisture: 120 ppm, crystallinity ~30%.
- **Result**: Reduced defects (bubbles, brittleness) in molded products.
### **8. Comparison with Alternatives**
| **Technology** | **Pros** | **Cons** | **PLA Suitability** |
|--------------------------|----------------------------------------|---------------------------------------|---------------------|
| **Mixing Drying Dehumidifier** | Integrated, energy-efficient, precise | High upfront cost | ★★★★★ |
| **Conventional Oven** | Low cost | Uneven drying, no dehumidification | ★★☆☆☆ |
| **Desiccant Dryers** | Deep dehumidification | No mixing function, slower | ★★★☆☆ |
---
### **9. Industry Standards & Certifications**
- **ISO 9001**: Quality management for consistent performance.
- **FDA 21 CFR**: Compliance for food-contact PLA applications.
- **CE/UL Certification**: Electrical and safety standards.
### **10. Leading Manufacturers**
- PLC-controlled systems for biopolymers.
- *odular designs with humidity feedback control.
-solutions for small-scale PLA producers.
**Conclusion**
The PLA Mixing Drying Dehumidifier is a cornerstone of modern biopolymer processing, addressing PLA’s unique challenges with precision and efficiency. Its integration of mixing, drying, and dehumidification not only safeguards material quality but also aligns with sustainability goals by minimizing energy waste. For manufacturers prioritizing product consistency and scalability, this system is a strategic investment.
**For tailored solutions, consult equipment providers with expertise in bioplastics and dehumidification technology.**
